EyeSDN® USB-S0
a multifunctional ISDN device for BRI-lines
Description / Features
The EyeSDN USB-S0 is a call recording device for the two telephone lines of an ISDN S0 basic rate interface. The ISDN bus is passively tapped with a high impedance circuit.
The digital contents of the ISDN frames is transferred to the PC via a USB cable, which is also used to power the device. Software on the PC decodes the information in the D channel and creates audio files from the B channel data during active calls. All data is stored on the hard disk of the PC operating the device.
The EyeSDN USB-S0 has 4 multi-colour status LEDs. These indicate:
- device activity,
- ISDN line power feeding state,
- layer 1 and layer 2 activity,
- signal polarity and
- B-channel usage (calls in progress).
The device and software can automatically detect if an S0 bus is operated in point-to-point or in point-to-multipoint configuration.
The small form factor and rugged enclosure make EyeSDN USB-S0 suitable for stationary and mobile use.
